2 Pack Universal Performance High Flow Tapered Oval Clamp On Pod Air Filter Intake Cleaner 54mm Chrome Red Motorcycle Scooter ATV UTV Cafe Racer Dirt Bike Moped

2 Pack tapered oval performance pod filter in chrome. Fits many late 70's and early 80's Honda's as well as other models, see dimensions below. This filter is also available in all black.FeaturesFlexible rubber molded flange instead of the 2 piece design like many pod filters.Flange design has no step so it does not block important openings on the carburetor intake.Tighter, more streamline fit without any risk of vibration causing the air filter to move independently while attached to the carburetors.Keep in mind, for the bike to run smoothly, you may need to install larger jets and make other adjustments to match the higher air flow. The rubber mounts are flexible and can be mounted on 53mm and 55mm carburetor flanges.IMPORTANT: Be sure to measure your carburetor prior to purchase. Also measure how much room you have between the carburetor and the frame or any side covers. Use the dimensions below to see if these will work on your bike. Just because the filters fit the carbs doesn't mean they'll fit in the bike without some obstruction. Some carburetors have very tight spacing which will not allow for a 73mm wide pod filter to fit side by side.Dimensions:54mm ID where it mounts to the carburetors70mm Air filter length86mm Total length including rubber73mm Width of oval104mm Height of ovalFits Honda:CB400A Hawk Hondamatic - 1978CB400TI Hawk I - 1978-1979CB400TII Hawk II - 1978-1979CB400T Hawk - 1980-1981CM400A Hondamatic - 1979-1981CM400C Custom - 1981CM400E - 1980-1981CM400T - 1979-1981CB450T Hawk - 1982CB450SC Nighthawk - 1982-1986CM450A Hondamatic - 1982-1983CM450C Custom - 1982CM450E - 1982-1983CX500 - 1978-1979CX500C Custom - 1979-1982CX500D Deluxe - 1979-1981GL500 Silver Wing - 1981-1982GL500I Silver Wing Interstate - 1981-1982CB650 - 1981-1982 - Mechanical carbs / does not fit CV carbsCB650 Custom - 1981 - Mechanical carbs / does not fit CV carbsCB650SC Nighthawk - 1982 - Mechanical carbs / does not fit CV carbsCX650C Custom - 1983GL650 Silver Wing - 1983GL650I Silver Wing Interstate - 1983CB750C Custom - 1980-1982CB750F Super Sport - 1979-1982CB750K - 1979-1982CB750K Limited Edition - 1979CB750SC Nighthawk - 1982-1983CB900C Custom - 1980-1982CB900F Super Sport - 1981-1982CB1000C Custom - 1983CBX Super Sport - 1979-1982CB1100F Super Sport - 1983Fits Kawasaki:KZ1000A/J - 1981-1983KZ1000B/K LTD - 1981-1982KZ1000C/P Police - 1982-1999KZ1000M CSR - 1981-1982KZ1000R Lawson Replica - 1982-1983KZ1100A - 1981-1983KZ1100B GPZ - 1981-1982KZ1100D Spectre - 1982-1983KZ1100L LTD Shaft - 1983KZ1300 - 1981-1982KZ750B/E - 1980-1982KZ750H LTD - 1980-1983KZ750L - 1983KZ750N Spectre - 1982-1983ZL1000 Eliminator - 1987ZN1100B LTD - 1984-1985ZX550 GPZ - 1984-1985ZX750 GPZ - 1982-1985Fits Suzuki:GS1000G - 1980-1981GS1000GL - 1980-1981GS1000S - 1980GS1000S Katana - 1982GS1100E - 1980-1983GS1100G - 1982-1983GS1100GK - 1982-1983GS1100L - 1980GS1100S Katana - 1983GS1150E - 1984-1986GS700E - 1985GS750E - 1980-1983GS750ES - 1983GS850G - 1979-1983GS850GL - 1980-1983Fits Yamaha:SR500 - 1978-1981XJ650 Maxim - 1980-1983XJ650L Turbo Seca - 1981-1983XJ650R Seca - 1982XJ900 Seca - 1983XS1100 - 1978-1981XS1100L Mid-Special - 1980-1981XS1100S Special - 1979-1981XS750 - 1977-1979XS750S - 1978-1979XS850 - 1980-1981XS850L Mid-Special - 1980-1981XS850S Special - 1980-1981XT500 - 1976-1981NOTE: Fits other model bikes as well. Check your carburetor flange diameter before purchase.

• 2 Pack tapered oval performance pod filter in chrome. Fits many late 70's and early 80's Honda's as well as other models, see dimensions below. This filter is also available in all black.
• Flexible rubber molded flange instead of the 2 piece design like many pod filters.
• Flange design has no step so it does not block important openings on the carburetor intake.
• Tighter, more streamline fit without any risk of vibration causing the air filter to move independently while attached to the carburetors.
• 54mm ID where it mounts to the carburetors.
• 70mm Air filter length, 86mm Total length including rubber.
• 73mm Width of oval, 104mm Height of oval.
• For the bike to run smoothly, you may need to install larger jets and make other adjustments to match the higher air flow. The rubber mounts are flexible and can be mounted on 53mm and 55mm carburetor flanges.
• IMPORTANT: Be sure to measure your carburetor prior to purchase. Also measure how much room you have between the carburetor and the frame or any side covers. Use the dimensions below to see if these will work on your bike. Just because the filters fit the carbs doesn't mean they'll fit in the bike without some obstruction. Some carburetors have very tight spacing which will not allow for a 73mm wide pod filter to fit side by side.
• Fitment note: Honda changed from mechanical to CV carburetors on the CB650. CV carburetors have a tight spacing that may not work with these pods, see measurements above.